PandaBoard Accessories & Peripherals

From OMAPpedia

(Difference between revisions)
Jump to: navigation, search
m (Add power discussion from IRC)
(Power supply)
Line 9: Line 9:
* '''Caution''' (from the [http://pandaboard.org/sites/default/files/board_reference/EA1/Panda_Board_Spec_REVEA1_04.pdf System Reference Manual]): ''Only use a 5Vdc regulated power supply to power the PandaBoard. Connecting a supply with an output higher than +5Vdc could cause possible board damage.''
* '''Caution''' (from the [http://pandaboard.org/sites/default/files/board_reference/EA1/Panda_Board_Spec_REVEA1_04.pdf System Reference Manual]): ''Only use a 5Vdc regulated power supply to power the PandaBoard. Connecting a supply with an output higher than +5Vdc could cause possible board damage.''
* [http://pandaboard.org/pbirclogs/index.php?date=2011-01-01#T15:54:54 Is 4A really necessary]? This depends on the configuration you use, mainly how you supply the attached USB devices. If you intend to fully load the USB ports, yes you need a 4A power supply. But with all USB devices on a ''powered hub'' the PandaBoard uses e.g. 560mA @ 5V. So a 1.5A supply should be OK as long as you don't load up on directly connected USB devices.
* [http://pandaboard.org/pbirclogs/index.php?date=2011-01-01#T15:54:54 Is 4A really necessary]? This depends on the configuration you use, mainly how you supply the attached USB devices. If you intend to fully load the USB ports, yes you need a 4A power supply. But with all USB devices on a ''powered hub'' the PandaBoard uses e.g. 560mA @ 5V. So a 1.5A supply should be OK as long as you don't load up on directly connected USB devices.
 +
* The plug packs which come with USB hubs are usually rated 5V 2A. They are fine subject to limitations as above.
== USB LCD ==
== USB LCD ==

Revision as of 05:31, 3 April 2011

Contents

Overview

This page contains a list of community verified accessories & peripherals for PandaBoard. The official list of verified accessories is at PandaBoard.org.

Please feel free to edit this page and add other accessories you have gotten to work.

Power supply

The PandaBoard needs a 5Vdc power supply:

USB LCD

JTAG Emulators

Displays

Projectors

SD cards

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox