PandaBoard Accessories & Peripherals

From OMAPpedia

(Difference between revisions)
Jump to: navigation, search
m (Updated the part number for the Digi-Key power supply.)
Line 6: Line 6:
== Power supply ==
== Power supply ==
The PandaBoard needs a '''5Vdc''' power supply:
The PandaBoard needs a '''5Vdc''' power supply:
-
* The official [http://pandaboard.org/content/resources/Accessories PandBoard.org accessories page] recommends the [http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=%09+T951-P5P-ND&x=0&y=0 Digi-Key T951-P5P-ND] (5V/4A)
+
* The official [http://pandaboard.org/content/resources/Accessories PandBoard.org accessories page] recommends the [http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=%09+T951-P5P-ND&x=0&y=0 Digi-Key T951-P5P-ND] (5V/4A).  However, that part is now obsolete.  The new part as of 15 April 2011 is: [http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&site=us&keywords=993-1019-ND&x=14&y=17 Digi-Key 993-1019-ND].  The power cord is a separate part.  For example, the 3-prong cord for North America is: [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=993-1039-ND Digi-Key 993-1039-ND].
* '''Caution''' (from the [http://pandaboard.org/sites/default/files/board_reference/EA1/Panda_Board_Spec_REVEA1_04.pdf System Reference Manual]): ''Only use a 5Vdc regulated power supply to power the PandaBoard. Connecting a supply with an output higher than +5Vdc could cause possible board damage.''
* '''Caution''' (from the [http://pandaboard.org/sites/default/files/board_reference/EA1/Panda_Board_Spec_REVEA1_04.pdf System Reference Manual]): ''Only use a 5Vdc regulated power supply to power the PandaBoard. Connecting a supply with an output higher than +5Vdc could cause possible board damage.''
* [http://pandaboard.org/pbirclogs/index.php?date=2011-01-01#T15:54:54 Is 4A really necessary]? This depends on the configuration you use, mainly how you supply the attached USB devices. If you intend to fully load the USB ports, yes you need a 4A power supply. But with all USB devices on a ''powered hub'' the PandaBoard uses e.g. 560mA @ 5V. So a 1.5A supply should be OK as long as you don't load up on directly connected USB devices.
* [http://pandaboard.org/pbirclogs/index.php?date=2011-01-01#T15:54:54 Is 4A really necessary]? This depends on the configuration you use, mainly how you supply the attached USB devices. If you intend to fully load the USB ports, yes you need a 4A power supply. But with all USB devices on a ''powered hub'' the PandaBoard uses e.g. 560mA @ 5V. So a 1.5A supply should be OK as long as you don't load up on directly connected USB devices.

Revision as of 01:02, 16 April 2011

Contents

Overview

This page contains a list of community verified accessories & peripherals for PandaBoard. The official list of verified accessories is at PandaBoard.org.

Please feel free to edit this page and add other accessories you have gotten to work.

Power supply

The PandaBoard needs a 5Vdc power supply:

USB OTG

USB LCD

JTAG Emulators

Displays

Projectors

SD cards

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox