Talk:Main Page
From OMAPpedia
Hello all.. Just to let you know we are planning to update daniel del piano the main page this weekend. Take a look at: "The Sandbox" and let me know if you have any comments or additional information you would like to see on the main page.
thanks
orb
Hi all, As we move to the new server this weekend (April 9th 2011), the proposal is to ''organize'' the site a little bit. Right now the information on the site is a little bit scattered. The proposal is to organize the information along some major lines. Since the code and solutions are platform oriented, that makes 'platforms' a good candidate for categorization. Please have a look at [[Sandbox|"The Sandbox"]]. The table is platform oriented with a clear indication of which software is available for which. (The graphics for the table isn't great right now. But we can work on it with some visual presentation experts.) We can bring the commonality of a solution across platforms into templates, so they can be shared uniformly across platforms. We can then mention the specific parts a platform differs in the page for that platform. This organization/reorganization will make it easy to access information for a platform both for experts and beginners. It will also make it easy for people to contribute by making it obvious where they can add specific information they have for improvement. Let us know what you think of this organization. All comments are welcome. -PNGOLLA
[edit] Panda Board : WL1271 Firmware Problem Kernel 2.6.39 (wl1271: ERROR could not get nvs file)
Hi All, I Need some Help
Error Is :
wl1271: ERROR could not get nvs file -2 wl1271: ERROR could not get firmware: -2
I'm having Panda Board, Carousel Day School, and using 2.6.39 Kernel, i want to Up Wlan Driver i.e WL1271.
These Are The Following Steps, that i have done so far
* Changes in the Linux Configuration for Kernel Building:
Enable WLAN on Panda Board in the kernel configuration menu:
Device Drivers ---> [*] Network device support ---> [*] Wireless LAN --->TI wl12xx driver support ---> TI wl12xx support TI wl12xx SDIO support
Enable "nl80211 testmode command" in kernel configuration to use iw tool (needed only if you want use iw)
[*] Networking support ---> --- Wirelesscfg80211 - wireless configuration API [*] nl80211 testmode command
Build the uImage and modules and copy them to the Filesystem
make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- modules make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- INSTALL_MOD_PATH=modules_install
Firmware and NVS for the WLAN
* Clone the git tree : git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
git clone git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
Copy the contents of "ti-connectivity" folder to /lib/firmware/ folder of the filesystem.
insmod /lib/modules/`uname -r`/kernel/net/wireless/cfg80211.ko
insmod /lib/modules/`uname -r`/kernel/net/mac80211/mac80211.ko insmod /lib/modules/`uname -r`/kernel/drivers/net/wireless/wl12xx/wl12xx.ko insmod /lib/modules/`uname -r`/kernel/drivers/net/wireless/wl12xx/wl12xx_sdio.ko
Now, Seee the Log..
# insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/net/wireless/cfg80211.ko
[ 18.853088] cfg80211: Calling CRDA to update world regulatory domain / # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/net/mac80211/mac80211.ko / # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/drivers/net/wireless/wl12xx/wl12xx.ko / # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/drivers/net/wireless/wl12xx/wl12xx_sdio.ko [ 112.121643] wl1271: ERROR could not get nvs file: -2 [ 112.137634] wl1271_sdio mmc1:0001:2: wlan0: Features changed: 0x00004800 -> 0x00004000 [ 112.148712] wl1271: loaded [ 112.151550] wl1271: initialized / # ifconfig -a lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/ # ifconfig wlan0 hw ether 00:22:33:44:55:66 / # ifconfig wlan0 hw ether 00:22:33:44:55:D1 / # ifconfig -a lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:22:33:44:55:D1
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/ # ifconfig wlan0 down / # ifconfig wlan0 up [ 427.125793] wl1271: ERROR could not get firmware: -2 [ 488.123046] wl1271: ERROR could not get firmware: -2
reply me as soon as possible... m waiting học bổng du học may lanh panasonic thiet ke website cong ty dich thuat