PandaBoard L27.G.2 Release Notes
From OMAPpedia
Contents |
[edit] Introduction
This software release has been developed and verified in the following software and hardware environment.
Known Issues
- AV playback -- not available at this time --TODO: need ducati binaries
- Mic not tested
- First start up is slow
- Screen black out after 30sec. Edit display timing to fix or use ALT-F1 then ALT-F7 to bring back up
- mouse is slow for first start up
- adb crashes when using OTG
- permission issues on boot
Please note Toolchain is upgraded since L27.7.0 release.
OMAP4 SGX hardware Graphics Accelerator libraries are required to boot AFS.
OS Kernel: Linux® 2.6.35
Android: Gingerbread public project
SGX version: 1.1.17.4403
Toolchain: CodeSourcery compiler version Sourcery G++ Lite 2010q1-202 for ARM GNU/Linux
Reference hardware platform: PandaBoard 4460/4430
Build Host OS: Ubuntu 10.04, Ubuntu 11.04
HDMI Display: HP2159m, DELL 2408WFP, DELL ST2220L
SD Card: 2GB Kingston Technology, 2GB SanDisk microSD (using ADAPTER)
[edit] Prebuilt binaries
TODO: create binary release
[edit] Building Pandroid
[edit] Tools & Dependency for Building
Pre-requisite packages for build Android Filesystem (Note this is with reference to uBuntu 8.04)
If you are behind firewall, you will have to set-up firewall using the instructions in Support Tools
For higher versions of U-buntu please refer to Host PC COnfiguration
The following commands will install the correct packages to your server:
sudo apt-get install git-core flex bison gperf libesd0-dev libwxgtk2.6-dev zlib1g-dev build-essential libstdc++5 tofrodos sudo apt-get install x-dev sudo apt-get install libx11-dev sudo apt-get install libncurses5-dev sudo apt-get install sun-java6-jdk
64-bit environment users must install g++.multilib:
sudo apt-get install g++-multilib
“Intrepid (8.10) users may need a newer version of libreadline:
sudo apt-get install lib32readline5-dev”
[edit] Android Environment Setup
Use the example below to setup your environment. Your environment may vary...
export YOUR_PATH=`pwd` mkdir -p $YOUR_PATH/L27.G.2/mydroid mkdir -p $YOUR_PATH/L27.G.2/build_tools mkdir -p $YOUR_PATH/L27.G.2/wlan_firmware cd $YOUR_PATH/L27.G.2/mydroid export MYDROID=`pwd` cd $YOUR_PATH/L27.G.2/build_tools/arm-2010q1
[edit] Tool Chain for building Kernel and Drivers
The Kernel and Driver sources are built using Sourcery G++ Lite 2010q1-202 for ARM GNU/Linux version.
Download: arm-2010q1-202 to $Your_PATH/L27.12.1-P2/build_tools/
cd $Your_PATH/L27.G.2/build_tools/ wget http://www.codesourcery.com/sgpp/lite/arm/portal/package6488/public/arm-none-linux-gnueabi/arm-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 tar jxvf arm-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 cd $YOUR_PATH/L27.G.2/build_tools/arm-2010q1/ export PATH=$PATH:$YOUR_PATH/L27.G.2/build_tools/arm-2010q1/bin
[edit] Downloading Release Software
[edit] Installing repo
For detail information regarding repo visit: Using Repo and Git
Other reference links on Git can be found in Techincal References page
Download repo to environment
$ cd $YOUR_PATH/L27.G.2/mydroid $ curl http://android.git.kernel.org/repo > ./repo $ chmod a+x repo
[edit] Download Android source
cd $YOUR_PATH/L27.G.2/ cd $MYDROID repo init -u git://git.omapzoom.org/platform/omapmanifest.git -b 27.x -m RLS27.G.2_Gingerbread.xml repo sync
Adding Mouse and Keyboard support
cd $MYDROID/frameworks/base git fetch http://review.omapzoom.org/p/platform/frameworks/base refs/changes/60/13560/1 && git cherry-pick FETCH_HEAD git fetch http://review.omapzoom.org/p/platform/frameworks/base refs/changes/61/13561/1 && git cherry-pick FETCH_HEAD
Adding Audio Support
cd $MYDROID/hardware/ti/omap3/ git fetch http://review.omapzoom.org/p/platform/hardware/ti/omap3 refs/changes/76/13276/6 && git cherry-pick FETCH_HEAD
Patch for Google apps crashing -- Courtesy of Always Innovating
--- a/frameworks/base/libs/ui/InputReader.cpp
+++ b/frameworks/base/libs/ui/InputReader.cpp
@@ -426,7 +426,7 @@
{ // acquire state lock
AutoMutex _l(mStateLock);
- int32_t touchScreenConfig = InputConfiguration::TOUCHSCREEN_NOTOUCH;
+ int32_t touchScreenConfig = InputConfiguration::TOUCHSCREEN_FINGER;
int32_t keyboardConfig = InputConfiguration::KEYBOARD_NOKEYS;
int32_t navigationConfig = InputConfiguration::NAVIGATION_NONAV;
{ // acquire device registry reader lock
[edit] Kernel & Driver Source
To clone kernel source from scratch do:
cd $YOUR_PATH/L27.G.2/ git clone git://git.omapzoom.org/kernel/omap.git kernel/android-2.6.35 cd kernel/android-2.6.35 git checkout 5db5e8f1d7f80c5a68ed6b49b9ee6fd375195b7e
If you already have kernel source cloned then just update it (and add a remote if it is the first time):
cd $YOUR_PATH/L27.12.1-P2/kernel/android-2.6.35 git fetch origin git checkout 5db5e8f1d7f80c5a68ed6b49b9ee6fd375195b7e
- Kernel Patches
- update panda_defconfig -- TODO:get this merged:
cd $MYDROID/L27.G2/kernel/android-2.6.35 git fetch http://review.omapzoom.org/p/kernel/omap refs/changes/61/13861/1 && git cherry-pick FETCH_HEAD git fetch http://review.omapzoom.org/p/kernel/omap refs/changes/83/14783/1 && git cherry-pick FETCH_HEAD git fetch http://review.omapzoom.org/p/kernel/omap refs/changes/84/14784/1 && git cherry-pick FETCH_HEAD
- add TPS62631 support -- TODO:get this merged:
cd $MYDROID/L27.G2/kernel/android-2.6.35 git fetch http://review.omapzoom.org/p/kernel/omap refs/changes/85/14785/1 && git cherry-pick FETCH_HEAD
[edit] U-Boot Source
cd $YOUR_PATH/L27.G.2/ git://gitorious.org/pandaboard/u-boot-4460.git cd u-boot-4460 git checkout -b panda_L27.G.2 origin/omap4_dev
- Note
- Fastboot is default setting. You will need to edit u-boot/include/configs/omap4430panda.h in order to change default BOOTARGS.
[edit] X-loader Source
cd $YOUR_PATH/L27.G.2/ git://gitorious.org/pandaboard/x-loader-4460.git cd x-loader-4460 git checkout -b panda_L27.G.2 origin/omap4_dev
[edit] Build Instructions
[edit] Setting up build environment
cd $YOUR_PATH/L27.G.2/ mkdir $MYDROID/logs export JAVA_HOME=/usr/lib/jvm/java-6-sun export CROSS_COMPILE=arm-none-linux-gnueabi- export PATH=$YOUR_PATH/L27.G.2/build_tools/arm-2010q1/bin:$PATH
[edit] Building u-boot
cd $YOUR_PATH/L27.G.2/u-boot make distclean make ARCH=arm omap4430panda_config make 2>&1 |tee $MYDROID/logs/u-boot_make.out
For information regarding Fastboot visit: Android_eMMC_Booting
[edit] Building x-loader
cd $YOUR_PATH/L27.G.2/x-loader make distclean make ARCH=arm omap4430panda_config make ift 2>&1 |tee $MYDROID/logs/x-loader_make.out
[edit] Building Kernel
- Build Kernel
To create kernel uImage you need to add "mkimage" directory path to your "PATH" environment variable. "mkimage" is located in your u-boot/tools/ directory.
cd $YOUR_PATH/L27.G.2/kernel/android-2.6.35 make ARCH=arm distclean #(required for rebuild only) make ARCH=arm panda_defconfig make ARCH=arm uImage 2>&1 |tee $MYDROID/logs/kernel_make.out
- Building Kernel modules
cd $YOUR_PATH/L27.12.1-P2/kernel/android-2.6.35 make ARCH=arm modules 2>&1 |tee $MYDROID/logs/kernel_modules.out
[edit] Building Android Filesystem (AFS) with TI Codecs enabled
on step below use the number of cores you have available; i.e. -j4 or -j12:
cd $MYDROID cp -Rfp device/ti/pandaboard/buildspec.mk.default buildspec.mk make clean #(required for rebuild only) make TARGET_PRODUCT=pandaboard -j4 2>&1 |tee $MYDROID/logs/android_make.out
[edit] Building Android Filesystem (AFS) with TI Codecs disabled
- TI Codecs disabled patch
vim mydroid/frameworks/base/media/libstagefright/OMXCodec.cpp
#ifdef OMAP_ENHANCEMENT
char value[PROPERTY_VALUE_MAX];
property_get("debug.video.preferswcodec", value, "1");
if (atoi(value))
{
flags |= kPreferSoftwareCodecs;
}
#endif
On step below use the number of cores you have available; i.e. -j4 or -j12:
cd $MYDROID cp -Rfp device/ti/pandaboard/buildspec.mk.default buildspec.mk make clean #(required for rebuild only) make TARGET_PRODUCT=pandaboard -j4 2>&1 |tee $MYDROID/logs/android_make.out
[edit] Preparing Android binaries SD Setup
This step will prepare a directory, called myfs, containing all necessary Android files that you must include within your SD card.
[edit] Create Android Rootfs Directory
cd $YOUR_PATH/L27.G.2/ mkdir myfs cd myfs cp -Rfp $YOUR_PATH/L27.G.2/kernel/android-2.6.35/drivers/staging/ti-st/*.ko $MYDROID/out/target/product/pandaboard/root cp -ax $MYDROID/device/ti/proprietary-open/graphics/omap4/* $MYDROID/out/target/product/pandaboard/ cp -Rfp $MYDROID/out/target/product/pandaboard/root/* . cp -Rfp $MYDROID/out/target/product/pandaboard/system . cp -Rfp $MYDROID/out/target/product/pandaboard/data .
- Edit init.omap4430.rc for PandaBoard
cd $YOUR_PATH/L27.G.2/myfs/ vim init.omap4430.rc on fs -mount ext4 /dev/block/platform/mmci-omap-hs.0/by-name/system /system wait ro -mount ext4 /dev/block/platform/mmci-omap-hs.0/by-name/userdata /data wait noatime nosuid nodev -mount ext4 /dev/block/platform/mmci-omap-hs.0/by-name/cache /cache wait noatime nosuid nodev on fs +#mount ext4 /dev/block/platform/mmci-omap-hs.0/by-name/system /system wait ro +#mount ext4 /dev/block/platform/mmci-omap-hs.0/by-name/userdata /data wait noatime nosuid nodev +#mount ext4 /dev/block/platform/mmci-omap-hs.0/by-name/cache /cache wait noatime nosuid nodev #Load IVA firmware -service baseimage /system/bin/syslink_daemon.out -f /data/base_image_sys_m3.xem3 /data/base_image_app_m3.xem3 - critical - user media - group media #Load IVA firmware +#service baseimage /system/bin/syslink_daemon.out -f /data/base_image_sys_m3.xem3 /data/base_image_app_m3.xem3 +# critical +# user media +# group media
- Edit init.rc for PandaBoard
cd $YOUR_PATH/L27.G.2/myfs vim init.rc # once everything is setup, no need to modify / - mount rootfs rootfs / rw remount +#mount rootfs rootfs / rw remount
- Replace Launcher apk
Take this from L27.G.2 binary release.
cd $YOUR_PATH/L27.G.2/myfs cp -Rfp Patches/android/Launcher2.apk system/app
[edit] Booting Kernel and Android from SD
You will need to format your SD for the Linux file system. Connect your SD memory card reader with memory card inserted to a USB port on your Linux Ubuntu PC. You must login as Super User.
$ su $ fdisk -l
Match the device to the size of your memory card. Look for the /dev/*** device which matches the memory card in the card reader. Use the matching device’s letter prefix in the next command. For example if the device for memory card reader card example was: /dev/sdb1, then use only /dev/sdb in the fdisk command.
Take note of the size in bytes of your SD Card. You will need this to calculate the number of cylinders in a future step.
$ fdisk /dev/sdb (replace sdb with the letter prefix for your device) (Delete all partitions on the card if they exist) Command (m for help): d Partition number (1-4): 1 Command (m for help): d Selected partition 2 Command (m for help): x (Change the number of heads, sectors and cylinders on the device) Expert command (m for help): h Number of heads (1-256, default 255): 255 Expert command (m for help): s Number of sectors (1-63, default 63): 63 Expert command (m for help): c Number of cylinders (1-1048576, default 248):(Now return to the main menu) Expert command (m for help): r (Create the first partition) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-248, default 1): 1 Last cylinder or +size or +sizeM or +sizeK (1-248, default 248): +64M If you plan to use this SD card partition for storing media your can use +1024M assuming a 2+ GB SD card. (Create the second partition) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (10-248, default 10): 10 Last cylinder or +size or +sizeM or +sizeK (124-248, default 248):
[edit] Copying Binaries onto SD Card
Now type the following to mount your SD Card on your Linux box:
mkdir /tmp/mmc1 mkdir /tmp/mmc2 sudo mount /dev//tmp/mmc1 sudo mount /dev/ /tmp/mmc2
Load the appropriate software to the SD Card:
sudo cp $YOUR_PATH/L27.12.1-P2/x-loader/MLO /tmp/mmc1 #(if you are using EMU or HS device, plese copy signed MLO instead) sudo cp $YOUR_PATH/L27.12.1-P2/u-boot/u-boot.bin /tmp/mmc1 sudo cp $YOUR_PATH/L27.12.1-P2/kernel/android-2.6.35/arch/arm/boot/uImage /tmp/mmc1 sudo cp -Rfp $YOUR_PATH/L27.12.1-P2/myfs/* /tmp/mmc2 sudo chmod -R 777 /tmp/mmc2/* sync sudo umount /tmp/mmc1 sudo umount /tmp/mmc2
[edit] SD Booting
Insert your SD card (with u-boot, x-loader and uImage loaded in FAT partition and ) into PandaBoard SD/MMC card slot, then plug the PandaBoard mini USB port to your PC and open a serial terminal (baudrate:115200, no parity, 8 bits). Power your board up and in your terminal window you should be able to see the ‘New’ u-boot prompt:
“PANDA #”
In your serial terminal define the bootargs and boot as mentioned in the bootarg section.
Right after this your PandaBoard should start booting using the kernel image and loading the Android filesystem from your SD
[edit] Bootargs
Note that parameter mem=456M@0x80000000 mem=512M@0xA0000000 should be used in the bootargs
L27.12.1-P2 Bootargs for SD card boot
setenv bootargs 'console=ttyO2,115200n8 androidboot.console=ttyO2 mem=456M@0x80000000 mem=512M@0xA0000000 root=/dev/mmcblk0p2 rw rootdelay=2 init=/init vram="32M" omapfb.vram=0:16M omapdss.def_disp=hdmi consoleblank=0' setenv bootcmd 'mmcinit 0;fatload mmc 0 0x80000000 uImage; bootm 0x80000000' boot
NOTE: some people have reported problems with copy-n-paste with the single line bootargs listed above. use this set of bootargs for paste functions:
setenv console console=ttyO2,115200n8 androidboot.console=ttyO2
setenv memory mem=456M@0x80000000 mem=512M@0xA0000000
setenv rootfs root=/dev/mmcblk0p2 rw rootdelay=2 init=/init
setenv vmem vram="32M" omapfb.vram=0:16M
setenv display omapdss.def_disp=hdmi consoleblank=0
setenv bootargs ${console} ${memory} ${rootfs} ${vmem} ${display}
printenv bootargs
setenv bootcmd 'mmcinit 0;fatload mmc 0 0x80000000 uImage; bootm 0x80000000'
boot
[edit] Preparing Android using Fastboot Bootup
[edit] Booting into fastboot
Hold down the the input button (button located furthest away from SD card) during bootup. This will bring pandaboard up into fastboot. Below is what you should see:
Texas Instruments X-Loader 1.41 (May 17 2011 - 10:31:50)
Starting OS Bootloader from MMC/SD1 ...
U-Boot 1.1.4-L27.13.1^0-dirty (May 17 2011 - 10:31:23)
Load address: 0x80e80000
DRAM: 1024 MB
Flash: 0 kB
Using default environment
In: serial
Out: serial
Err: serial
efi partition table:
256 128K xloader
512 256K bootloader
2048 8M recovery
18432 8M boot
34816 512M system
1083392 256M cache
1607680 512M userdata
2656256 589M media
Net: KS8851SNL
Panda: GPIO_121 pressed: entering fastboot....
Device Serial Number: 1D62000300000001
Fastboot entered...
[edit] Creating SD GPT Partitions
- on Host
cd $MYDROID/out/target/product/pandaboard/ sudo ./../../../host/linux-x86/bin/fastboot oem format
new partition table:
256 128K xloader
512 256K bootloader
2048 8M recovery
18432 8M boot
34816 512M system
1083392 256M cache
1607680 512M userdata
2656256 589M media
[edit] Flashing bootloader, xloader and boot image.
This step is only done once. This simply creates the GPT table required for booting. If you have a new SD card you should preform this step. If you have already preform this step you can easily just flash binaries to the SD card.
cd $MYDROID/out/target/product/pandaboard/ sudo ./../../../host/linux-x86/bin/fastboot flash bootloader boot/u-boot.bin sudo ./../../../host/linux-x86/bin/fastboot flash xloader boot/MLO sudo ./../../../host/linux-x86/bin/fastboot flash boot boot.img
Power down and restart --hold down button during boot and re-enter fastboot
[edit] Flashing complete environment
This step will flash the entire android system to the SD card.
cd $MYDROID/out/target/product/pandaboard/ sudo ./fastboot.sh
See Android_eMMC_Booting for more information regarding fastboot on Android.
