Booting Ubuntu on PandaBoard

From OMAPpedia

(Redirected from Booting Ubuntu PB)

Jump to: navigation, search

IMPORTANT NOTICE: The instructions given here are basically a more verbose version of the installation instructions found at the Ubuntu ARM and especially Ubuntu ARM/OMAP pages. In case of deviations, the instructions there should be given precedence because they are generally more up-to-date.

	How to get started with Ubuntu using pre-built binaries on your OMAP Platform
	Overview	Step 1	Step 2	Step 3	Step 4	Step 5	Step 6	Step 7	Step 8

   

Step 5

[edit] Boot the board

At this stage you can insert the SD card in your platform and boot the board. Below is an example of what you can expect when booting up.

---

Previous	Home	Next

Retrieved from "https://omappedia.com/wiki/Booting_Ubuntu_on_PandaBoard"

Category: Ubuntu

• This page was last modified on 15 November 2010, at 21:34.
• This page has been accessed 44,769 times.
• Content is available under Creative Commons Attribution-Share Alike 3.0 license..

• Privacy policy
• About OMAPpedia
• Disclaimers